Crystal Clear Tabletop Resin is for Tabletops, Bar tops, Benchtops, Artwork, Coasters, and Jewellery. Our Tabletop resins come second to none, compared with other products on the NZ marketplace..
Resinzwood Crystal Clear Tabletop Resin contains the highest UV additives possible, but most importantly, you will get a glass finish every time, fully cured and the most scratch-resistant of all Tabletop Resins on the market today.
Resinzwood Crystal Clear Table Top Resin
Resinzwood Crystal Clear Tabletop resin, our new and improved imported version made to our
specifications by a leading company based in China that produces some of the best epoxies on the planet. Resinzwood Crystal Clear Tabletop resin has a semi-low viscosity, making it easy to pour and self-level without a huge amount of fuss. It has a working time of around 30 minutes compared to Ultra Fast, with a working time of ten to fifteen minutes max, pending room temperature. This particular resin is a little softer than our Ultra-Fast Epoxy, which you can search for on our site, which has a cure time of four hours.
Resinzwood Crystal Clear Tabletop Resin is loved by many people across the globe, being used
for all forms of finishing tables and bar tops to artwork. It is favoured by artists crafting coasters and other small cast / moulded products as well.
Ratio Pot Life Cure Times
• Ratio A Resin to B Hardener is two parts A to 1 part B
• Pot Life is 20 minutes •
Working time is 40 mins •
Cure time is 6 to 8 hours at 22c, sometimes a bit longer •
Production Date: All our products have a production date with an Expiry date of 12 – 15 Months for our Tabletop resin.
Method - Mixing
- Pre-heat the container of resin by placing it in a bucket with hot water for 5 to 10 mins
- Exactly measure parts A and B to the ratio above
- Pour part B into a mixing container, then add part A.
- Mix for 5 minutes clockwise and counter-clockwise, scraping the sides of the container so the product is well blended. Always use a clean stick for mixing.
- Let the resin stand for 5 to 10 minutes to release air bubbles.
- Once you pour Resinzwood Crystal Clear Tabletop resin, use a gas torch or heat gun to remove any remaining air bubbles. After about 5 to 10 minutes, you can do this again.
Tips and Help Guide
- By adding Part B to the container before Part A, you are mixing in, ensuring that all resin molecules come into contact with the hardener. This eliminates the risk of having uncured resin in your project.
- This product loves heat, so once you have done your pour, it is a good idea to have a higher room temperature.
- It is best to have some air movement in the room. Avoid blowing a fan directly over the resin; just circulating air in the room is a good practice.
- We are entirely available via email!
Thank you for purchasing our products from Resin Wood Tables NZ, Resinzwood Limited. By doing so, you are actively keeping New Zealanders employed.